Handy Step - Master Cart Extension

The Master Cart Extension will add four more full size spools of #10 gauge wire at a time to The Master Cart or multiple small spools totaling 8-3/4 inches in width, per shaft. It is designed to keep all wires separate, so they do not tangle up. It also makes pulling wires easier because your spools will not “walk away”. Very easy to move around and store.

SPECIAL FEATURES:


  • Reinforced lower front bracket - 1/4 inch x 1-1/4 inch steel.
  • Thumb set screw to add rigidity to coupling.
  • Quick connect and disconnect - makes adding any number of Master Cart Extensions easy.
  • Master Cart Handle and Master Cart Extension are secured with a detent pin for quick changing.

100% SATISFACTION GUARANTEED


Try any Tradesmen product for 30 days. If you are not completely satisfied, return the product and Tradesmen Products Inc. will refund your full purchase price, excluding shipping. Tradesmen Products are guaranteed for one year against all defects in material and workmanship when used as intended. (Does not included normal wear and corrosion.)

The Master Cart Extension will add on four more spools of wire to The Master Cart for pulling three or more circuits.

SPECIFICATIONS:

Model #: TPEX01
Construction:
Welded, Heavy gauge steel
Weight:    16 pounds
Length:    26 inches
Width:    10 1/2 inches
Height:    15 inches
Reel Shaft:
1/2 inch diameter
8 3/4 inches from hitch pin to mounting surface
3 1/2 inches from center line to bottom surface
6 1/2 inch diamter spool maximum
Receiver:    2" Standard

$118.95



 
?>?>