Handy Step - Master Cart

The Master Cart will hold four full size spools of #10 gauge wire, or multiple small spools totaling 8-3/4 inches in width, per shaft. It is designed to keep all wires separate, so they do not tangle up. It also makes pulling wires easier because your spools will not “walk away”. Very easy to move around and store.

NOTE: Master Cart Handle is included with every purchase.

SPECIAL FEATURES:

Reinforced lower front bracket - 1/4 inch x 1-1/4 inch steel.

Solid axle panel for strength and support

Quick connect and disconnect Master Cart Handle makes adding a Master Cart Extension easy.

Master Cart Handle and Master Cart Extension are secured with a detent pin for quick changing.

Thumb set screw to add rigidity to coupling.

100% SATISFACTION GUARANTEED

Try any Tradesmen product for 30 days. If you are not completely satisfied, return the product and Tradesmen Products Inc. will refund your full purchase price, excluding shipping. Tradesmen Products are guaranteed for one year against all defects in material and workmanship when used as intended. (Does not included normal wear and corrosion.)

The Master Cart is usually to hold the four main colors of wire for fulling one or two circuits

SPECIFICATIONS:

Model #: TPMC01
Construction:
Welded, Heavy gauge steel
Weight:   19 pounds
Length:   29 inches
Width:   14 1/4 inches
Height:   15 inches
Reel Shaft:
1/2 inch diameter
8 3/4 inches from hitch pin to mounting surface
3 1/2 inches from center line to bottom surface
6 1/2 inch diamter spool maximum
Receiver:   2" Standard

The Original Handy Step - Master Cart

Handy Step - Master Cart

100% SATISFACTION GUARANTEED

$169.95